TB 10008-2006 铁路电力设计规范(附条文说明)
作者:标准资料网 时间:2024-05-19 05:00:51 浏览:8228
来源:标准资料网
基本信息
标准名称: | 铁路电力设计规范(附条文说明) |
中标分类: |
铁路 >>
牵引供电 >>
牵引供电综合 |
ICS分类: |
土木工程 >>
铁路建筑
|
替代情况: | TB 10008-1999 |
发布日期: | |
实施日期: | |
首发日期: | |
作废日期: | |
出版日期: | |
页数: | 242页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 铁路 牵引供电 牵引供电综合 土木工程 铁路建筑
基本信息
标准名称: | 滚丝机 第3部分:基本参数 |
英文名称: | Thread rolling machines-Part 3:Parameters |
中标分类: |
机械 >>
通用加工机械与设备 >>
锻压机械 |
ICS分类: |
机械制造 >>
无屑加工设备 >>
轧制、挤压和拉制设备
|
替代情况: | 替代JB/T 5201-1991 |
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2007-08-28 |
实施日期: | 2008-02-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国锻压机械标准化技术委员会 |
起草单位: | 济南铸锻所捷迈机械有限公司;青岛生建机械厂 |
起草人: | 马立强、梅松芳 |
出版社: | 机械工业出版社 |
出版日期: | 2008-01-01 |
页数: | 4页 |
书号: | 15111·8741 |
适用范围
JB/T 5201的本部分规定了两主轴作同步、同方向回转并作水平方向相对运动的滚丝机的基本参数。本部分适用于新设计的滚丝机;也适用于两主轴作水平方向相对运动的数控滚轧机和其他用途滚轧机。对于老产品在涉及基本参数改动时也应符合本部分。三轴滚丝机也应参照执行。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用加工机械与设备 锻压机械 机械制造 无屑加工设备 轧制 挤压和拉制设备
MIL-R-6106J, MILITARY SPECIFICATION: RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR (02 NOV 1981) [S/S BY MIL-PRF-6106K]., This specification establishes general requirements for electromechanical relays with contact ratings from 25 amperes resistive (unless otherwise specified) and upward for use in electrical applications. Auxiliary contacts may be rated at lower currents. Relays covered by this specification are capable of meeting the electrical and environmental requirements when mounted directly to the structure of aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support and shipboard equipment. Other ratings may be as specified (see 3.1). CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.